Six engineered layers that stop cold room condensation permanently. This is how we turn a dripping, mouldy cold cellar into a clean, dry room that stays that way.
Layer 6 — acrylic finish coat Every cold room gets the full system — six layers engineered to remove the cause of condensation, not paint over it.
We start by installing a professional-grade vapour barrier over the interior surfaces of your cold cellar. This is the critical first layer that stops warm, humid air from reaching the cold concrete and condensing into water.
A base coat of polymer-modified cement is applied over the barrier. Polymer cement bonds aggressively, resists moisture and creates a solid foundation for the insulation system.
Rigid EPS insulation foam panels thermally break the cold concrete from the room. Surfaces stay above the dew point — the root cause of condensation is eliminated, not painted over.
A reinforcing fibre mesh is embedded across the insulation. It ties the entire system together, prevents cracking and gives the finish coats long-term structural strength.
A smooth skim coat of polymer cement is trowelled over the mesh, levelling the surface and sealing the system into one continuous, moisture-resistant shell.
Finally, a durable acrylic finish coat is applied in the colour of your choice from our 92-colour chart. The result: a clean, bright, dry cold cellar that stays that way.
Condensation happens when warm, humid air touches a surface colder than the dew point. Every "fix" that ignores that physics — paint, fans, dehumidifiers — fails, because the concrete stays cold and the moisture keeps coming.
Our system insulates the cold concrete behind a sealed, continuous shell. Surface temperatures rise above the dew point, so condensation can't form. That's why the fix is permanent.
Free quotes across the GTA — send us a photo of your cold room and we'll take it from there.
+1 647 296-4200